Internal Calling

Yes

Lift handset...hear dial tone...dial 5 digit extension number

External Calling

Yes

Lift handset...hear dial tone...dial outside access code...hear dial tone...dial number

Call Transfer

Yes

To Activate: Depress switch, flash or link key (first call is placed on temporary hold)...hear special tone...dial number...announce call in privacy...hang up

Note: If third party doesn't answer or line is busy, depress switch, flash or link key twice to be reconnected to original party and eliminate busy or ringing signal.

3 Way Conference
(To add a third party to an existing call)

Yes

Depress switch, flash or link key (first call is placed on temporary hold)...hear special tone...dial number... announce conference...depress switch, flash or link key again...begin conversation

Note: If third party doesn't answer or line is busy, depress switch, flash or link key twice to be reconnected to original party and eliminate busy or ringing signal.

6 Way Conference
(A call consisting of 3 to 6 parties)

Yes

To Activate: Lift handset...hear dial tone...dial the conference code *173...listen for steady dial tone...dial number of first party...party is automatically connected upon answering. To add next conferee...depress switch, flash or link key...hear special dial tone...dial number...announce conference...depress switch, flash or link key...begin conversation. Repeat the procedure for each conferee to be added...(if called number is busy or does not answer, hang up...when telephone rings, lift handset and resume conversation with existing conferees). Any person may hang up at any time without interrupting the conference as long as one of the remaining parties is in the Centrex system.

The conference code is *138 if you have an ISDN set without a 6 port conference button.

Automatic Call Back
(To call a busy Centrex number automatically)

Yes

To Activate: If a number you call is busy...depress switchhook...hear dial tone and dial *120...wait for confirmation tone...hangup. When the busy line is free, you will be called back.

To Cancel: Lift handset...hear dial tone...dial *124 and wait for confirmation tone...hang up.

UW Extension - WisLine Teleconference Service

No

WisLine is a conference call service operated by UW Extension’s Instructional Communications Systems. For more information about cost and to schedule a teleconference, contact WisLine reservations at 262-0753, by email at wisline@ics.uwex.edu or on the web at www.uwex.edu/ics/wisline

Consultation Hold
(To talk privately with a third party)

Yes

Depress switch, flash or link key (first call is placed on temporary hold)...hear special tone...dial number... converse...when conversation is complete and third party hangs up, original call is reconnected

Note: If third party doesn't answer or line is busy, depress switch, flash or link key twice to be reconnected to original party and eliminate busy or ringing signal.

Call Hold
(To place a call on hold)

No

To Activate: Ask caller to hold...depress switch, flash or link key...hear special tone...dial *112... hear confirmation tone followed by dial tone...leave handset off hook to keep call on hold...OR...dial another number

To Reconnect: Hang up...when phone rings...lift handset and resume conversation

Call Pickup
(To answer a ringing phone in your group)

No

To pick up from an idle telephone: Lift handset...hear dial tone...dial *111...the incoming call is now connected to your line...begin conversation

Directed Call Pickup
(To answer any ringing phone that allows call pickup)

No

To pick up from an idle telephone: Lift handset...hear dial tone...dial *114...dial the number of the ringing telephone...the incoming call is now connected to your line...begin conversation

Yes

Yes

Call Forward Variable
(To have all incoming calls ring at a different number)

Yes

To Activate: Lift handset...hear dial tone...dial *116...hear special dial tone...dial extension number to which calls will be forwarded...hear confirmation tone followed by ringing or busy...if number answers...announce that you are forwarding your calls...if no answer or busy...hang up...calls will be forwarded.

If forwarding to a non-Centrex number...dial *116...hear dial tone...dial 9 then the number. Confirm the process worked by calling the number. It should forward to the designated number. Repeat the process if forwarding did not activate.

To Cancel: Lift handset...hear dial tone...dial *118...wait for confirmation tone...hang up

Call Forward Don't Answer
(Forward all calls to a pre-selected number when your line is not answered after a specified number of rings)

No

This feature is predefined...no access code. To activate this feature, contact voice.services@doit.wisc.edu.

Call Forward Busy
(Forwards all calls to a pre-selected number when your line is busy)

No

This feature is predefined...no access code. To activate this feature, contact voice.services@doit.wisc.edu.

Call Waiting
(Signals you that another call is waiting on your line)

No

To Respond: When call waiting tone is heard...depress switch, flash or link key (first call is placed on temporary hold)...second call is now on the line...begin conversation. To return the first call or alternate between calls...depress switch, flash or link key once...caller will be on the line. To activate this feature, contact voice.services@doit.wisc.edu.

To cancel for one call: Dial *10...hear special dial tone...dial desired number

6 Number Speed Dial
(To dial an abbreviated code to reach frequently called numbers)

Yes

To Program or Change: Lift handset...hear dial tone...dial *119...hear second dial tone...dial the 1 digit code (2-7)...dial the number you wish to store...listen for steady dial tone...hang up...the number is now stored

To Use: Lift handset...hear dial tone...dial the 1 digit code (2-7)...Press # (touch tone) or wait for ringing (rotary)

Expanded Speed Call List
(30 number speed call list and 80 number speed call lists, see note 3 below)

Note: Speed calling codes for 30 number lists are 20-49. Codes for 80 number lists are #20-#99.

If your ISDN set does not have a CVF feature button, use the *116 code to activate call forwarding and *118 to cancel call forwarding.